We designed a new Mezzanine at Levitt Safety's building in Taiganova. We completed the Architectural and structural designs. We designed a completed set of construction drawings for Building Permit submission.
Our client was local contractor Stratford Contracting Ltd.
0 Comments
Wse designed engine stands that could be used by Cummins to work on their large engines in their local shop. Four stands are required per engine. To be placed under the frame of each of the four corners. Each stand weighs approximately 110lbs so we designed wheels and a removable handle to make the stands easy to move around.
We were hired to visually inspect the roof trusses and sheathing for damage due to a recent fire in the kitchen of Pizza Hut at its Thickwood location.
During a recent inspection by the RMWB, it was noticed that there wan't enough vertical rebar placed on either side of the stairwell opening. Lateral bracing was a concern. It was an ICF foundation from NUDURA. The foundation was already in place/poured.
We provided a design solution that involved reinforcing both sides of the stairwell opening using c-channel bolted to the existing concrete foundation wall. There was no need to remove any concrete and construction was able to continue. Client = Habitat for Humanity We designed a reducer for local contractor Northweld Welding & Fabrication.
|
McAroe EngineeringWe are a small local Fort McMurray engineering company. Our rates are competitive and there is no need to fly engineers in from Edmonton or Calgary. Archives
April 2020
Categories |
|
Home |
About |
Services |
Menu |
Contact |
|